iFlight Nazgul5 V2 Analog 240mm 5 Inch 6S Freestyle FPV Racing Drone

€419,90
Unit price per

Tax included. Shipping calculated at checkout.

New version

Old version

BLITZ F7 V1.1 Flight Controller

MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD chip: AT7456E
Flash: 32 MB (black box flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA/SLA pads
Smartaudio / IRC Tramp VTX protocol is supported
LED Controller: Yes
Beeper: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mounting pattern: 30.5*30.5mm/4mm PCB hole diameter
Dimensions: 36.5 x 35mm
Weight: 7.8g

SucceX-E F7 flight controller

- MCU: STM32F22RET6 216MHz

- Gyro: MPU6000

- OSD: IFLIGHT OSD （ AT7456E ）

- BEC: 5V 2.5A

- BlackBox: 16MB

- Uart: 4 * UART (UART1 、 UART2 、 UART4 、 UART5)

- 4 × Dshot / PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 LED Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

- External size: 36*36 mm / 30.5 * 30.5 / φ4 mounting

- Weight: 6.9g

BLITZ E45S 4in1 ESC

Input voltage: 2-6S

Firmware: QH-40 16.7

Continuous current: 45A

Instantaneous current: 55A

MCU: BB21

Current sensor: yes scale 200

Drive signal support: DShot150/300/600MultiShot.OneShot

Weight: 15g

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm //3mm

- Weight: 14.4g

- Support 2-6S Lipo input

- STM32F051 MCU, 48MHz Runs BLHELI 16.X. firmware

- Current sensor: YES

-BEC: NO

- Support: DShot150 / 300/600/1200 / MultiShot / OneShot etc.

- Target: GH-30 BLS 16.7

PRODUCT DESCRIPTION

Nazgul5 V2 is a 5" BNF (Bind-and-Fly) quadcopter. It is upgraded XL5 V5 FPV frames . Pre-tuned and set up . All you need is just bind and fly! With our popular XING-E- Motors with durable NSK bearings, tons of power and smooth flights are guaranteed.Have you gotten a hard hit and snapped an arm?Don't worry, get spares for your order and easily swap them out on the spot.Want buckle up your beast for GoPro too? Check out our collection of high quality TPU prints for your camera!

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or need to be approved by local authorities! Please ensure you fly legal frequencies and use our prepared Betaflight VTX tables according to your region.

Specification:

BLITZ F7 & BLITZ E45S 45A flight stack
XING-E 2207 FPV engine (6S 1800KV)
Wheel hour: 240mm * 240mm
Body size: 170*170mm
Propeller Size: 5 inch / 5.1 inch
FC pattern: 30.5*30.5/20*20mm
FPV Cam Spacing: 19mm
Weight: 393.4 g (without battery)

SucceX Force 5.8g 800mW VTX Adjustable

- Item: SucceX-Force 800mW adjustable VTX

- Input voltage:

- Output Voltage / Maximum Current: 5V 1A

- 12V input current: 40mA in PIT mode, 95mA at 25mA, 185mA at 200mW，250mA at 500mW, 380mA at 800mW

- output 48 frequency points,

- Size: 36*36*3mm

- PIT / 25mW / 200mW / 400mW / 800mW

Feature:

- 5mm arm design for more durability

- Easy swap arms

- LED lights logo

- XING-E 2207 engines and NAZGUL 5140 props
- 5" version also fits 5.1" propeller
- Popular True-X configuration
- TPU crash guards
- Fits both 30.5x and 20x stacks

Delivery content:

1x Nazgul5 V2 240mm 5 inch 6S FPV Racing Drone
1x RaceCam R1 , 2.1mm lens 19x19mm camera
1x Albatross RHCP SMA 5.8g antenna
2 sets x Nazgul 5 inch 3 blades (set of 4 - color may vary)
1x 20*200mm microfiber PU leather battery wristband (color may vary)
1x 20*250mm microfiber PU leather battery armband (color may vary)

Additional recommended parts (not included)

Battery 6S 1300mAh
Camera mount for GoPro