iFlight Nazgul5 HD 6S 5 inch 240mm Freestyle FPV Racing Drone

  • €559,90
    Unit price per 
Tax included. Shipping calculated at checkout.

New version Old version

BLITZ F7 V1.1 flight controller

Brand: iFlight
Model: LIGHTNING F7 V1.1
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD chip: AT7456E
Flash: 32 MB (black box flash)
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA/SLA pads
Smartaudio / IRC Tramp VTX protocol is supported
LED Controller: Yes
Beeper: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mounting pattern: 30.5*30.5mm/4mm PCB hole diameter
Dimensions: 36.5 x 35mm
Weight: 7.8g

SucceX-E F4 flight controller

- MCU: STM32F405
- Gyro: MPU6000
- Betaflight OSD: YES
- Black box: 8 MB
- 4X uarts(1 2 3 6)
- 8 x Dshot/Proshot/Oneshot output
- 8 x individual ESC power/signal pads
- 1 x group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
- VTX Telemetry: YES
- WS2812 LED strip: YES
- Baro: No
- Beeper: YES
- Input: 2-6S(Max 8S)
- BEC: 5V / 2.5A continued
- Firmware target: BETAFLIGHTF4
- Mounting: 30.5*30.5mm 4φ4mm with grommets φ3mm
- Dimensions: 36*36mm
- Weight: 7.6g

BLITZ E45S 45A controller

Input voltage: 2-6S
Firmware: QH-40 16.7
Continuous current: 45A
Instantaneous current: 55A
Current sensor: yes scale 200
Drive signal support: DShot150/300/600MultiShot.OneShot
Weight: 15g

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
- Dimension: 40*43mm
- Mounting Holes: 30.5*30.5mm//3mm
- Weight: 14.4g
- Support 2-6S Lipo input
- STM32F051 MCU, 48MHz Runs BLHELI 16.X firmware
- Current sensor: YES
- Support: DShot150 / 300/600/1200 / MultiShot / OneShot etc.
- Target: GH-30 BLS 16.7


Nazgul5 HD is a 5" BNF (Bind-and-Fly) quadcopter with the DJI Digital FPV system on it. Pretuned and set up, all you need is just bind-and-fly! Lots of performance and smooth flights guaranteed with our Popular XING-E motors with durable NSK bearings. Hit hard and broken an arm? Don't worry, get spares with your order and easily swap them out in the field. Want to strap GoPro on this beast too? ?Checkout ours

Collection of high quality TPU prints for your camera!


Brand Name: iFlight

Item Name: Nazgul5 HD 4S 5 inch FPV Racing Drone

SucceX-E F4 45A flight stack
XING-E 2207 FPV Motor (
6S 1800KV )
Wheelbase: 240mm
Body size: 170*170mm
Propeller Size: 5 inch / 5.1 inch
FC mounting hole: 30.5*30.5/20*20mm
FPV Cam Spacing: 19mm
Weight: 400.8 g (without battery)

- 5mm arm design for more durability
- Easy swap arms
- LED illuminated logo
- XING-E 2207 engines and NAZGUL 5140 props
- 5" version also fits 5.1" propeller
- Popular True-X configuration
- TPU crash guards
- Fits both 30.5x and 20x stacks

Delivery content:

1x XL5 V5 Frame
1 x Caddx Vista VTX

1 x Polar camera (USA/CZ comes fog NANO )

1 x SucceX-E F4 45A Flight Stack

4 x XING-E 2207 FPV Motor ( 6S 1800KV )
1 x Albatross LHCP RP-SMA 5.8g Antenna
2 sets x Nazgul 5 inch 3 blades (set of 4 - color may vary)
1 x 20*200mm Microfiber PU Leather Battery Strap (color may vary)
1 x 20*250mm Microfiber PU Leather Battery Strap (color may vary)


The DJI remote control is recommended for beginners because you don't need to set up another receiver. However, it is also optional on this BNF drone as it is NOT required to use the FPV system. If you are not using the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.

Click to edit the product in Ali Orders.
Note: only show for shop owner