iFlight Nazgul5 Evoque F5 HD 4S/6S 5 inch FPV Racing Drone
The secret of ultimate performance is passion
That was the slogan for our latest approach to creating this work of art! Fully protected electronics, fully illuminated, paired with the latest and greatest electronics we can offer. Months of engineering went into this BNF and all the lessons previously learned to ensure that both novice and experienced pilots would enjoy the new Nazgul Evoque to the fullest from the first second.
Lightweight Sidewalls - Keep your rig clean
In your early days, did you ever feel like a lawnmower slicing through the grass, slicing and throwing wet grass over and into your flight stack? Well... Those days are over! The new sidewalls not only protect against moisture, but also protect the inner workings from impacts hitting small components of your flight controller.
Secured Integrated XT60 Battery Connector - As secure as it gets
Hanging battery connectors will ALWAYS find a way into your props, there's always that one time you forgot to attach it properly and nearly cut the cord while flying. There was only one way to get rid of this and we think we may have found a solution. The integrated XT60 connector on the back lets you securely connect your battery and route all cables away from your props.
High Performance Electronics - F7 55A Power Stack
Our BLITZ Mini F7 flight controller with modern USB Type-C connector, 16MB flight recorder , and 5 UARTs for the gear you might want to use. Power from the gods with our new BLITZ Mini E55 55A ESC packed with better heat dissipating mosfets and a whole bunch of SMD capacitors to filter out any possible motor noise, alongside the pre-soldered direct-installed capacitor right next to your battery cables.
XING2 Performance Motors - The best motors just got better
7075 aluminum bell, 5mm titanium alloy shaft, long life NSK bearings, center slotted magnets for better response and reduced air gaps for higher magnetic flux with increased power and efficiency. Not to mention the XING signature dampening ring between bell and bearing to increase durability and smooth your flights.
Lighting - Let 1t be green
360 degree lighting for day and night. Perhaps the prettiest BNF out there, but a practical one too. The lower light shows the battery voltage, a quick check gives you an indication of the remaining voltage; Never take off with an empty battery again. Laid LED wires in the side panels and the underside of the arms are also illuminated and give you some style during the next night's race.
Digital HD Experience - Caddx Polar
Equipped with the DJI Digital FPV System with 50mBit transmission for 720P video feed on your DJI FPV goggles and range you never expected from your old analog VTX. We use the new CaddX Vista Polar HD system installed on the back of your quad. The Polar camera offers better image quality than other CaddX cameras. Better low-light performance and more detailed shadows. In daylight similar to Nebula Pro with improved dynamic range.
Item Name: Nazgul5 Evoque F5X HD 4S/6S FPV Racing Drone
Overall dimensions: 136*190mm (body measurement)
Bottom to Top Distance: 28mm
Arm Thickness: 6mm
Bottom plate thickness: 3mm
Top Plate Thickness: 3mm
Thickness of the top (middle) plate: 3 mm
XING2 2207 engines (4S/6S)
Nazgul F5 propellers
Weight: 412g (without battery and GoPr0 mount)
FC // BLITZ Mini F7 flight controller
MCU: STM32 F722
Betaflight OSD: IFLIGHT OSD (AT7456E)
Black box: 16 MB
5 X uarts
UART1 for VTX HD/Analog
UART2 for receiver
UART3、UART4 for GPS or other sensors that need serial port
UART6 for ESC telemetry
1 xSH1.0 9-pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI）
1 xSH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
1xSH1.0 6-pin connector for each receiver or DJI（3V3/R2i/5V /G/R2/T2）
1xSH1.0 4Pin connector GPS (T4/R4/G/5V)
1xSH1.0 4pin connector LED&Beeper (BUZ/LED/G/5V)
Smartaudio & IRCTramp VTX protocol supported
Firmware: IFRC-BASEF4 4.XX
NOTE: Support for FX protocol RX inputs, telemetry not supported.
ESC // BLITZ Mini E55 ESC
Support Lipo input 2-6S
Constant: 55 amps
Burst: 60 amps
Current Sensor: Yes
Current course: 100
Supported: DShot DShot150/300/600/MultiShot/OneShot etc.
Firmware: BLHeli 32
Mounting holes: 20*20mm/Φ4mm
1 x Nazgul5 Evoque F5 HD FPV Racing Drone ( Crushed X )
4 x Nazgul F5 Prop
2 sets of battery pads
4 x battery straps
1 * Screw Bag